@VZH73Эко-вал из дерева чтоли? Как это вообще может так прогнить?
2026-08-21 09:17:01
@userbttя предполагаю что вал был отремонтирован сваркой, которая еще както держалась это время, пока не проржавела
2026-08-21 09:19:39
@NightWatchTgRCD не должен срабатывать?
2026-08-21 10:01:04
@p_himikТам ток может быть в единицы мА, чтобы заметный эффект был.
2026-08-21 10:04:27
@userbttинтересно, а может ли вал из нержавейки, точечно проржаветь насквозь изза этого?
2026-08-21 10:05:55
@ivgenichВыглядит, что это было присрато сваркой и развалилось
2026-08-21 10:18:19
@Slava1Если гарантия 2 года, отдать обратно)
2026-08-21 10:48:24
@userbttвот тут еще одна проблема, чека нет:( насколько я помню и не дали. заказ по телефону, выдали через акс, оплата наличкой
2026-08-21 10:51:42
@userbttесли кому интересно, пришел ответ от stuart turner uk(писал им чтобы дали пояснения) : Thank you for your email regarding the shaft failure on your Stuart Turner pump, model 44934, and for providing the background to the issue.
We have now completed our investigation into the failed shaft.
The motor shaft is specified to be manufactured from stainless steel grade 1.4401 (316). Analysis of the returned shaft confirmed that it was stainless steel; however, the material composition did not fully conform to the specified 1.4401 grade.
While this material variation was identified during our investigation, we are unable to confirm that it was the sole or direct cause of the shaft failure, and nothing in this response should be taken as an admission of liability.
Further testing has confirmed that shafts currently being supplied meet the specified 1.4401 stainless steel requirement. Additional material verification controls have also been implemented by the supplier as part of our ongoing quality assurance processes.
We have also considered your concern regarding the authenticity of the pump. There is no indication from our investigation that the pump was counterfeit or an unauthorised product.
Thank you for bringing the matter to our attention and for allowing us the opportunity to investigate.
2026-10-08 07:40:50
@543612961можно им вслед кинуть вопрос, знают ли они что происходит с 316 нержой в присутствии меди, латуни и бронзы, при разрушении пленки. А так же про механизм щелевой коррозии
2026-10-08 07:47:17



